How to configure Streamlabs OBS | Picarto.tv - Help Center

How to configure Streamlabs OBS

After you downloaded and installed Streamlabs OBS please open it.

Click on "Setup later" to proceed to the main view of the program and click on "Settings" at the top right corner to configure your client:

In your settings menu panel click on "Stream" to configure your streaming settings:

Configure your Stream

Make sure to tick the "Show all services" checkbox and choose "Picarto" from the service list. Then choose your Server depending of your location and put in your Stream Key that you can get by logging in on Picarto. After that click on "Go Live" on the top right corner to bring up the livestream setup modal. Here you will be guided trough the process while gettign the server and key at the end of the tutorial. In order to show your key instead of the circles you will have to click on the "Show Key" button.

 


After you put in your Stream Key you can proceed with the "Output" settings on Streamlabs OBS.

Output Mode: Simple

With the output mode "Simple" you can edit all essential settings like video/audio bitrate and encode. Start your live stream with a low video bitrate of 300-400 kbit/s. You can increase them later on if the stream quality is not good enough for you. Please keep in mind that a higher bitrate needs a better internet connection. Your audience might get a stuttering stream or even frozen screens if you set the bitrate too high.

You don't have to change the audio bitrate for art live streams. If you are streaming music an increased audio bitrate might bring better quality to your live stream audio. It all depends on your own internet connection.

Output Mode: Advanced

1. Please check x264 EncoderUse CBR and Enable CBR padding

  • If you have drawings without video or fast movements you can also disable CBR to save bandwidth.

2. Max bitrate should be set according to our streaming standards. But not more than 3500. Also it is very important that your bitrate is not higher than your own internet upload speed, otherwise you will suffer frame drops.

To find how much upload speed you have you can do a speedtest here: http://www.speedtest.net/

Our recommended bitrates for different resolution are:

Your Upload

Resolution

Bitrate in kbit/s

Keyframe intervall

under 1 Mbps

480p

350 - 500

4

1.5 Mbps - 5 Mbps

720p -1080p

500 - 800

2

over 5 Mbps

1080p - 4k

1000 - 2000

1

If you have a very slow connection also set the Keyframe intervall to 4 or 8. But keep in mind this will increase your video loading time, but will ensure a more stable stream.

After you have configured your output settings you can proceed with your "Video" settings:

Output (Scaled) Resolution is the final resolution you are sending to our servers. If you choose lower resolutions this can help reducing your processing (CPU) power as well as the use of bandwidth.

FPS can stay at 30 FPS but you can lower it to 24 to save CPU processing and bandwidth.

Now you can click on the "Done" button at the bottom right to close the settings window and start your first livestream on Picarto.



Useful links about Streamlabs OBS and others

Streamlabshttps://www.streamlabs.com

Streamlabs OBS: https://www.streamlabs.com/streamlabs-obs

Internet Speedtest: http://www.speedtest.net